ActivatingLD32

Activating LANdecoder32

If you have been using an evaluation copy of LANdecoder32, please read the Activating an Upgraded Evaluation Copy page then return here.

After you reboot and you attempt to run one of the LANdecoder32 programs, you will see an interface similar to the following:

You must enter the serial number provided with newly purchased product; this number is in the format 12345678-ABCD.

The TAT55317 serial number you may see in other documentation is not valid and cannot be used.

If you enter the wrong serial number, you will have the opportunity to re-enter it.

You will then be asked for an 8-character Key Code that is generated by submitting the LANdecoder32 Serial Number and Product ID Code (shown above center, in red) to the Triticom Product Registration page:

http://www.triticom.com/prodreg.html [Register and Enable Triticom Products]

The information shown above is an example only and cannot be submitted for a valid registration.

Remember also that you cannot use the example serial number and ID code shown on that page when registering, but rather the information that is shown on the Registration Information interface as demonstrated here.

FAQS | Patches | Legacy | Contact